How to connect a receiver

How to connect a receiver

Someone else sits in the city waiting for emergence of high-quality digital telecasting, someone still watches all a habitual analog package. But those who did not get used to wait, already got a set for viewing of satellite television and enjoys the digital picture of TV programs on the plasma or LCD.

The sponsor of placement P&G Articles on the subject "How to Connect a Receiver" How to adjust the satellite antenna How to take video with TV How to connect the antenna

 Thus, in spite of the fact that on an entrance to the receiver quality high, it after all can be lost on the way from the tuner to the TV. In order to avoid these losses it is necessary to pick up correctly the interface to connect a receiver (the satellite tuner) at which losses of quality of the image will be minimum. Especially it is actual for the people accepting HDTV channels.

It is easiest to connect a receiver to the TV via the composite (component) socket which is located, as a rule, on one RCA (tulip). At such connection image sharpness and contrast of color as all signals go on one wire decreases. It will be a small shortcoming on the 15th inch TV, but for screens which diagonal is not less than 26 has some, such quality will be unacceptable, all impressions of viewing of new movies or telecasts, will be spoiled.

Connection through S-Video the interface will be more better. In such type of connection chromaticity and brightness is told on separate wires that does the picture of stabler, a shortcoming is the bad color embodiment.

The component interface is one step higher than the predecessors, it even more qualitative. Using three cables for transfer of video signal to the TV, losses as the image are minimized. Such interface will allow to bring without shame the picture to magnificent 36 inch ZhK or the plasma screen. The image at such connection accurate, with contrast colors. As sockets at such connection tulips (RCA) are usually applied.

Using SCART the socket, it is possible to connect a receiver both according to the RGB standard, and on composite S-Video. RGB, is the most qualitative format from the point of view of transfer of all components of video images.

However the equipment does not stand still and in recent years far promoted in the development, for transfer of the image with high resolution absolutely new HDMI interface was developed and created.