How to make a cap of the newspaper duringduring repair work, and they can be made of improvised materials, for example, from the newspaper, and it is better – from dense than boom..." " />

How to make a cap of the newspaper

Caps from newspapers become necessary, especially during a summer season, and also duringduring repair work, and they can be made of improvised materials, for example, from the newspaper, and it is better – from dense paper.

It is required to you

Newspaper or paper, scissors, paper clips

The sponsor of placement P&G Articles on the subject "How to Make a Cap of the Newspaper" How to fold a cap from paper How to issue the newspaper How to start issuing the newspaper

Instruction

1

Take the newspaper and get to work. Put a turn of the newspaper in half. Bend bottom edge and fill a corner under a strip. Fill inside the top corners of a rectangle.

2

From a bend bend corners, then bend top approximately in half, put edge in the bottom of a detail twice.

3

It is necessary that you pressed the corner unbent from above, further turn the product. Now bend the right and left side of a cap twice so that the rectangle turned out.

4

Creation of a cap like baseball cap will require a paper pattern which there is a lot of on the Internet.
Cut out a paper cloth (50 by 30 cm at least)

5

Cut through strips according to a pattern and, having slightly raised, chop off the stapler or paper clips. It is possible to use glue.